A washer machine is a useful appliance that can save you time and effort in doing laundry. However, like any other appliance, it needs proper care and maintenance to keep it working well and prevent problems. In this article, we will discuss some common washer machine issues and how to avoid or fix them:
Washer no drain water
One of the most frustrating washer machine problems is when the water does not drain from the tub after the cycle. This can cause your clothes to be soaked and your machine to smell bad. There are several possible causes for this issue, such as:
- A clogged or kinked drain hose
- A faulty drain pump or lid switch
- A blocked or jammed filter
- An overloaded or unbalanced load
To prevent this problem, you should:
- Check and clean the drain hose regularly and make sure it is not bent or twisted
- Replace the drain pump or lid switch if they are broken or worn out
- Clean the filter every few months and remove any debris or lint
- Avoid overloading or underloading your machine and distribute the clothes evenly
To fix this problem, you should:
- First, unplug the machine and bail out the water manually
- Next, locate and access the drain hose, pump, switch and filter
- Then, clear any blockages or obstructions in the hose, pump or filter
- After that, test the switch and pump for continuity and replace them if needed
- Finally, run a rinse cycle to check if the water drains properly
Washer making noise
Another common washer machine problem is when the machine makes loud or unusual noises during operation. This can indicate a mechanical issue or a loose part. Some of the possible causes for this issue are:
- Worn or damaged bearings, belts, pulleys or shocks
- Loose or broken screws, nuts, bolts or springs
- Foreign objects in the tub, pump or filter
- An unbalanced or heavy load
To prevent this problem, you should:
- Lubricate the bearings, belts, pulleys and shocks regularly and replace them if they are worn out
- Tighten any loose screws, nuts, bolts or springs and replace any broken ones
- Check and empty the pockets of your clothes before washing them and remove any foreign objects from the tub, pump or filter
- Balance your load and avoid washing bulky items alone
To fix this problem, you should:
Unplug the machine and inspect the parts for damage or wear
Replace any faulty parts with original OEM (Original Equipment Manufacturer) parts that fit your machine model perfectly and perform optimally
Remove any foreign objects from the tub, pump or filter
Adjust your load and run a spin cycle to check if the noise stops
Washer error code
A third common washer machine problem is when the machine displays an error code on its screen. This can indicate a specific issue with a part or a function of the machine. Different machines have different error codes, so you should consult your user manual or manufacturer’s website for their meanings. Some of the common error codes are:
- F21: Long drain time
- F02: Drain blocked
- F11: Communication error between control board and motor
- E1: Water supply error
To prevent this problem, you should:
Follow the instructions in your user manual for proper operation and settings of your machine
Clean and maintain your machine regularly according to the manufacturer’s recommendations
Use quality detergent and softener that are suitable for your machine type and water hardness
To fix this problem, you should:
Unplug the machine and wait for a few minutes before plugging it back in
Reset the machine by pressing and holding a specific button combination (check your user manual for details)
Troubleshoot the error code by following the steps in your user manual or online guide
Contact a professional repair service if the error code persists or you cannot fix it yourself
Washer won’t spin
A fourth common washer machine problem is when the machine does not spin at all or spins slowly. This can cause your clothes to be wetter than normal and take longer to dry. Some of the possible causes for this issue are:
- A faulty lid switch, door lock or motor coupler
- A worn or broken drive belt, clutch or motor
- A clogged or damaged water level switch or pressure hose
- An overloaded or unbalanced load
To prevent this problem, you should:
Replace the lid switch, door lock or motor coupler if they are broken or malfunctioning
Check and replace the drive belt, clutch or motor if they are worn out or damaged
If you are looking for a reliable, affordable and quality washer machine service, contact Appliance Repair Technicians. We have a team of certified, licensed and insured washer machine technicians who can handle any washer issue you may have. We offer same-day service, free estimates, 24/7 emergency service, and 100% satisfaction guarantee. Call us now and let us take care of your washer needs.
Appliance Repair Winnipeg 